Advantech ADAM-6022

SPHINX en Europe
ES
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Productos grupos > I/O Modules > Advantech ADAM-6022

Advantech ADAM-6022

Ethernet-based Dual-loop PID Controller

Advantech ADAM-6022
1075_27283.png
1075_27284.png
1075_27285.png
  • EspecificacionesEspecificaciones
  • DescripciónDescripción
  • Más informaciónesMás informaciónes
  • PDFPDF
  • 2 loop PID control algorithms built in one package
  • 3 analog input/1 analog output/1 digital input/1digital alarm output for 1 PID loop
  • Support multiple analog I/O ranges: 0 ~ 10 VDC, 0 ~ 20 mA and 4 ~ 20 mA
  • Support heating/cooling (direct/reverse) action mode
  • Support loop open/close (PID disable/enable) and analog output manual control modes
  • Built-in watchdog timer
The Advantech’s ADAM-6022 is an Ethernet-enabled dual-loop PID controller for general purposed PID control applications. A user-friendly utility software is included for users to set PID parameters (Pv, Mv, & Sv). Through the integrated web page, users can monitor and change the control set point through the Internet via web browser. The ADAM-6022 also supports MODBUS/TCP protocol. HMI software can easily access this module to monitor the I/O data and change the control parameters.
ProdGrafik
General

Loop Number
2 (3 AI, 1 AO, 1 DI, 1 DO for each control loop)


Analog Input

Channels
6 (differential)

Input Range
±10 V DC, 0 ~ 20 mA, 4 ~ 20 mA


Analog Output

Channels
2

Output Type
V, mA

Output Range
0 ~10 V DC, 4 ~ 20 mA, 0 ~ 20 mA


Digital Input

Channels
2

Dry Contact
Logic level 0: close to GND
Logic level 1: open

Wet Contact
Logic level 0: 0 ~ 3 V DC
Logic level 1: 10 ~ 30 V DC


Digital Output

Channels
2, open collector to 30 V, 100 mA max. load

Power Dissipation
300 mW for each module



COMMON SPECIFICATION


General

LAN
10/100Base-T(X)

Power Consumption
4 W @ 24 V DC

Connectors
1 x RJ-45 (LAN), Plug-in screw terminal block (I/O and power)

Watchdog
System (1.6 second) and Communication (programmable)

Power Input
10 ~ 30 V DC

Supports Modbus/TCP, TCP/IP, UDP and HTTP Protocols


Analog Input

Input Impedance
20 M W

Accuracy
±0.1% of FSR

Resolution
16-bit

Sampling Rate
10 sample/second

CMR @ 50/60 Hz
90 dB

NMR @ 50/60 Hz
60 dB

Span Drift
±25 ppm/° C

Zero Drift
±6 ìV/° C


Analog Output

Accuracy
±0.1% of FSR

Resolution
12-bit

Drift
±50 ppm/° C

Current Load Resistor
0 ~ 500 W


Protection

Isolation Protection
2,000 V DC

Built-in TVS/ESD Protection

Over Voltage Protection
±35 V DC

Power Reversal Protection


Environment

Operating Temperature
-10 ~ 50° C (14 ~ 122° F)

Storage Temperature
-20 ~ 80° C (-4 ~ 176° F)

Operating Humidity
20 ~ 95% RH (non-condensing)

Storage Humidity
0 ~ 95% RH (non-condensing)

Ordering Information

Part Number Description
ADAM-6022-AE Ethernet-based Dual-loop PID Controller
Accessory  
ADAM-6520-BE 5-port 10/100 Mbps Industrial Switch
PCLS-ADAMVIEW32 HMI Software for ADAM I/O Products
PWR-242-AE DIN-rail Power Supply
PWR-243-AE Panel Mount Power Supply
PWR-244-AE Panel Mount Power Supply

Los clientes que han visto este artículo también vieron
Accept

This website uses cookies to provide the best possible experience. More information.