MOXA ioLogik E2212

Flexible digital input/output configuration within one Ethernet DIO
The MOXA ioLogik E2212 provides system integrators with the flexibility to handle various field demands with 8 fixed input channels, 8 fixed output channels, and 4 channels that can be configured by software for input or output operation. You can configure the I/O channels to suit your needs, for combinations such as 12 inputs/8 outputs, 8 inputs/12 outputs or 10 inputs/10 outputs.

Single Ethernet DIO that accepts 3 types of sensors
Unlike traditional Ethernet I/O products, the MOXA ioLogik E2212 can connect to dry contact, PNP, and NPN sensors at the same time. You may decide on the sensor type depending on your wiring approach.

ioLogik E2212 Specifications


Inputs and Outputs

Digital Inputs
8 channels

Digital Outputs
8 channels

Configurable DI/Os
4 channels

Isolation
3k VDC or 2k Vrms


Digital Input

Sensor Type
Wet Contact (NPN or PNP) and Dry Contact

I/O Mode
DI or Event Counter

Dry Contact

• On: short to GND
  
• Off: open

Wet Contact (DI to GND)

• On: 0 to 3 VDC
  
• OFF: 10 to 30 VDC

Common Type
6 points per COM

Counter Frequency
900 Hz

Digital Filtering Time Interval
Software Configurable


Digital Output

Type
Sink

I/O Mode
DO or Pulse Output

Pulse Output Frequency
1 kHz

Over-voltage Protection
45 VDC

Over-current Protection
2.6 A (4 channels @650 mA)

Over-temperature Shutdown
175°C (min.)

Current Rating
200 mA per channel


Power Requirements

Power Consumption
136 mA @ 24 VDC


MTBF (mean time between failures)

Time
217,722 hrs

Database
Telcordia (Bellcore)



Common Specifications


LAN

Ethernet
1 10/100 Mbps RJ45 port

Protection
1.5 kV magnetic isolation

Protocols
Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP


Serial Communication

Interface
RS-485-2w: Data+, Data-, GND (3-contact terminal block)

Serial Line Protection
15 kV ESD for all signals


Serial Communication Parameters

Parity
None

Data Bits
8

Stop Bits
1

Flow Control
None

Baudrate
1200 to 115200 bps

Protocol
Modbus/RTU


Power Requirements

Power Input
24 VDC nominal, 12 to 36 VDC


Physical Characteristics

Wiring
I/O cable max. 14 AWG

Dimensions
115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)

Weight
under 250 g

Mounting
DIN rail or wall


Environmental Limits

Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature
-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity
5 to 95% (non-condensing)

Altitude
Up to 2000 m
Note Please contact us if you require products guaranteed to function properly at higher altitudes.


Standards and Certifications

Safety
UL 508

EMI
EN 61000-3-2; EN 61000-3-3; EN 61000-6-4;

FCC
Part 15, Subpart B, Class A

EMS
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5,
EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 61000-6-2

Shock
IEC 60068-2-27

Freefall
IEC 60068-2-32

Vibration
IEC 60068-2-6

Green Product
RoHS, CRoHS, WEEE



Ordering Information

Available Modules
ioLogik E2212	Ethernet Micro RTU Controller with 8 digital inputs, 8 digital outputs, and 4 configurable DIOs
ioLogik E2212-T	Ethernet Micro RTU Controller with 8 digital inputs, 8 digital outputs, and 4 configurable DIOs, -40 to 85°C operating temperature