MOXA MGate MB3180 / MB3280 / MB3480

SPHINX en Europe
ES
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Productos grupos > Gateways > MOXA MGate MB3180 / MB3280 / MB3480

MOXA MGate MB3180 / MB3280 / MB3480

Standard Modbus Serial to Ethernet Gateways

MOXA MGate MB3180 / MB3280 / MB3480
1676_12222.png
1676_8626.png
1676_33381.jpg
1676_33382.jpg
1676_33383.jpg
1676_33384.jpg
1676_33385.jpg
1676_33386.jpg
1676_33387.jpg
  • EspecificacionesEspecificaciones
  • DescripciónDescripción
  • Más informaciónesMás informaciónes
  • PDFPDF
  • Supports Auto Device Routing for easy configuration
  • Supports route by TCP port or IP address for flexible deployment
  • Converts between Modbus TCP and Modbus RTU/ASCII protocols
  • 1 Ethernet port and 1, 2, or 4 RS-232/422/485 ports
  • 16 simultaneous TCP masters with up to 32 simultaneous requests per master
  • Easy hardware setup and configuration
The MB3180, MB3280, and MB3480 are standard Modbus gateways that convert between Modbus TCP and Modbus RTU/ASCII protocols. Up to 16 simultaneous Modbus TCP masters are supported, with up to 31 RTU/ASCII slaves per serial port. For RTU/ASCII masters, up to 32 TCP slaves are supported.


Standard Modbus Network Integration

The three standard MGate™ models (MB3180, MB3280, and MB3480) are designed for easy integration of Modbus TCP and RTU/ASCII networks. With these models, Modbus serial slave devices can be seamlessly incorporated into an existing Modbus TCP network, and Modbus TCP slaves can be made accessible to serial masters. The MB3180, MB3280, and MB3480 offer features that make network integration easy, customizable, and compatible with almost any Modbus network.


High Density, Cost-Effective Gateways

The MGate™ MB3000 gateways can effectively connect a high density of Modbus nodes to the same network. The MB3280 can manage up to 62 serial slave nodes, and the MB3480 can manage up to 124 serial slave nodes. Each RS-232/422/485 serial port can be configured individually for Modbus RTU or Modbus ASCII operation and for different baudrates, allowing both types of networks to be integrated with Modbus TCP through one Modbus gateway.


Auto-Device Routing for Easy Configuration (patented)

Moxa’s Auto-Device Routing function helps eliminate many of the problems and inconveniences encountered by engineers who need to configure large numbers of Modbus devices. A single mouse click is all that’s required to set up a slave ID routing table and configure Modbus gateways to automatically detect Modbus requests from a supervisory control and data acquisition (SCADA) system. By removing the need to manually create the slave ID routing table, the Auto-Device Routing function saves engineers significant time and cost.


ProdGrafik
Specifications

    Ethernet Interface

      10/100BaseT(X) Ports (RJ45 connector)
      Auto MDI/MDI-X connection

      Magnetic Isolation Protection
      1.5 kV (built-in)



    Ethernet Software Features

      Industrial Protocols
      Modbus TCP Client (Master)
      Modbus TCP Server (Slave)

      Configuration Options
      All models: Web Console (HTTP), Device Search Utility (DSU), MGate Manager, MCC Tool, Telnet Console
      MGate MB3280/MB3480 only: Web Console (HTTPS)

      Management
      All models: ARP, DHCP Client, DNS, HTTP, SNMPv1/v2c/v3, TCP/IP, Telnet, UDP
      MGate MB3280/MB3240 only: HTTPS, SMTP, SNMP Trap, NTP Client

      MIB
      RFC1213, RFC1317

      Time Management
      NTP Client (MGate MB3180 Excluded)



    Security Functions

      Authentication
      Local database

      Encryption
      HTTPS
      AES-128
      AES-256
      SHA-256

      Security Protocols
      SNMPv3
      HTTPS (TLS 1.2) (except MGate MB3180)



    Serial Interface

      No. of Ports
      MGate MB3180: 1
      MGate MB3280: 2
      MGate MB3480: 4

      Connector
      DB9 male

      Serial Standards
      RS-232/422/485 (software selectable)

      Baudrate
      50 bps to 921.6 kbps

      Data Bits
      7, 8

      Parity
      None
      Even
      Odd
      Space
      Mark

      Stop Bits
      1, 2

      Flow Control
      DTR/DSR
      RTS Toggle (RS-232 only)
      RTS/CTS

      RS-485 Data Direction Control
      ADDC® (automatic data direction control)

      Pull High/Low Resistor for RS-485
      1 kilo-ohm, 150 kilo-ohms

      Terminator for RS-485
      MGate MB3180: None
      MGate MB3280/MB3480: 120 ohms



    Serial Signals

      RS-232
      TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

      RS-422
      Tx+, Tx-, Rx+, Rx-, GND

      RS-485-2w
      Data+, Data-, GND

      RS-485-4w
      Tx+, Tx-, Rx+, Rx-, GND



    Serial Software Features

      Industrial Protocols
      Modbus RTU/ASCII Master Modbus RTU/ASCII Slave



    Modbus (Transparent)

      Max. No. of Client Connections
      16

      Max. No. of Server Connections
      32



    Power Parameters

      Input Voltage
      12 to 48 VDC

      Input Current
      MGate MB3180: 200 mA @ 12 VDC
      MGate MB3280: 250 mA @ 12 VDC
      MGate MB3480: 365 mA @ 12 VDC

      Power Connector
      MGate MB3180: Power jack
      MGate MB3280/MB3480: Power jack and terminal block



    Physical Characteristics

      Housing
      Metal

      IP Rating
      IP301 Dimensions (with ears)
      MGate MB3180: 22 x 75 x 80 mm (0.87 x 2.95 x 3.15 in)
      MGate MB3280: 22 x 100 x 111 mm (0.87 x 3.94 x 4.37 in)
      MGate MB3480: 35.5 x 102.7 x 181.3 mm (1.40 x 4.04 x 7.14 in)

      Dimensions (without ears)
      MGate MB3180: 22 x 52 x 80 mm (0.87 x 2.05 x 3.15 in)
      MGate MB3280: 22 x 77 x 111 mm (0.87 x 3.03 x 4.37 in)
      MGate MB3480: 35.5 x 102.7 x 157.2 mm (1.40 x 4.04 x 6.19 in)

      Weight
      MGate MB3180: 340 g (0.75 lb)
      MGate MB3280: 360 g (0.79 lb)
      MGate MB3480: 740 g (1.63 lb)



    Environmental Limits

      Operating Temperature
      MGate MB3180: 0 to 55°C (32 to 131°F)
      MGate MB3280: 0 to 60°C (32 to 140°F)
      MGate MB3480: 0 to 55°C (32 to 131°F)

      Storage Temperature (package included)
      -40 to 85°C (-40 to 185°F)

      Ambient Relative Humidity
      5 to 95% (non-condensing)



    Standards and Certifications

      EMI
      CISPR 32, FCC Part 15B Class A

      EMC
      MB3180 Models: EN55032/24
      MB3280/3480 Models: EN55032/35

      EMS
      IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
      IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
      IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
      IEC 61000-4-5 Surge: Power: 1 kV (MB3180/MB3280)
      IEC 61000-4-5 Surge: Power: 1 kV; Signal: 2 kV (MB3480)
      IEC 61000-4-6 CS: 3 V
      IEC 61000-4-8 PFMF
      IEC 61000-4-11

      Safety
      MB3180 Models: EN 62368-1 and UL 60950-1
      MB3280/3480 Models: IEC/UL 62368-1



    MTBF

      Time
      MGate MB3180: 2,762,384 hrs
      MGate MB3280: 749,455 hrs
      MGate MB3480: 1,213,993 hrs

      Standards
      Telcordia SR332



Package Contents

    Device
      1 x MGate MB3180/MB3280/MB3480 Series gateway

    Power Supply
      1 x power adapter, suitable for your region

    Documentation
      1 x quick installation guide
      1 x warranty card




Ordering Information

Model Name No. of Serial Ports
MGate MB3180 1
MGate MB3280 2
MGate MB3480 4



Los clientes que han visto este artículo también vieron
Accept

This website uses cookies to provide the best possible experience. More information.