MOXA UC-7101

SPHINX en Europe
ES
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Productos grupos > Embedded PC > MOXA UC-7101

MOXA UC-7101

Product is End of Life : 2020-08-03
Mini RISC-based Ready-to-Run Embedded Computer with 1 Serial Port, LAN, SD

MOXA UC-7101
2011_30355.jpg
2011_8857.png
2011_8858.jpg
2011_8869.png
2011_12323.png
  • EspecificacionesEspecificaciones
  • DescripciónDescripción
  • Más informaciónesMás informaciónes
  • PDFPDF
  • MOXA ART ARM9 32-bit 192 MHz processor
  • 16 MB RAM (about 12 MB of user pogrammable space )
  • 8 MB Flash ROM (about 4 MB of user programmable space )
  • One 10/100 Mbps Ethernet
  • One software-selectable RS-232/422/485 serial port
  • Serial port speed from 50 bps to 921.6 Kbps, supporting ANY BAUDRATE
  • SD socket for storage expansion
  • Built-in RTC, buzzer, WatchDog Timer
  • Built-in µClinux platform (Linux platform for Plus version)
  • -40 to 75°C wide temperature model available
The MOXA UC-7101 may be Moxa’s smallest RISC-based communication platform for embedded applications, but it is also one of the most powerful. The UC-7101 comes with one RS-232/422/485 serial port and a 10/100 Mbps Ethernet LAN port to provide users with a versatile industrial communication and embedded computing platform. The UC-7101 embedded computer uses the MOXA ART ARM9 192 MHz RISC CPU, which provides a powerful computing engine and communication functions, but without generating too much heat. The built-in 8 MB NOR Flash ROM and 16 MB SDRAM give users plenty of storage capacity, and the SD socket provides greater flexibility for running a variety of applications. The LAN port built into the ARM9 CPU allows the UC-7101 computer to be used as a communication platform for basic data acquisition and protocol conversion applications, and the computer’s RS-232/422/485 serial port allows you to connect one serial device for data acquisition applications. The UC-7101 comes with the μClinux operating system pre-installed. Software written for desktop PCs is easily ported to the UC-7101 computer with a GNU cross complier, so that you will not need to spend time modifying existing software code. In addition, a wide temperature model is also available. It supports an operating temperature range of -40 to 75°C, making it suitable for any harsh environment. These features make the UC-7101 embedded computer an ideal solution for a variety of industrial automation applications.
ProdGrafik
Applications

  1. Protocol conversion
  2. Remote access
  3. Data acquisition
  4. Numeric computing
  5. Event handling
  6. Port buffering
Target Markets

  1. Industrial automation
  2. Building automation
  3. Transportation automation
  4. SCADA systems
  5. Medical automation
  6. Energy automation



Hardware Specifications


Computer

CPU
MOXA ART ARM9 32-bit RISC CPU, 192 MHz

OS (pre-installed)
μClinux or Linux

DRAM
16 MB

Flash
8 MB onboard


Storage

Storage Expansion
SD slot


Ethernet Interface

LAN
Auto-sensing 10/100 Mbps (RJ45), 1 port

Magnetic Isolation Protection
1.5 kV built-in


Serial Interface

Serial Standards
RS-232/422/485 software-selectable (DB9 male), 1 port

ESD Protection
15 kV ESD for all signals

Console Port
RS-232 (TxD, RxD, GND), 4-pin pin header output


Serial Communication Parameters

Data Bits
5, 6, 7, 8

Stop Bits
1, 1.5, 2

Parity
None, Even, Odd, Space, Mark

Flow Control
RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485

Baudrate
50 bps to 921.6 kbps (supports non-standard baudrates; see user´s manual for details)


Serial Signals

RS-232
TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND

RS-422
TxD+, TxD-, RxD+, RxD-, GND

RS-485-4w
TxD+, TxD-, RxD+, RxD-, GND

RS-485-2w
Data+, Data-, GND


LEDs

System
Ready

LAN
LED located on the RJ45 connector,
10M/Link x 1, 100M/Link x 1

Serial
TxD x 1, RxD x 1


Physical Characteristics

Housing
Aluminum (1 mm)

Weight
130 g

Dimensions
67 x 22 x 100.4 mm (2.64 x 0.87 x 3.95 in)

Mounting
DIN rail, wall


Environmental Limits

Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature
Standard Models: -20 to 80°C (-4 to 176°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity
5 to 95% (non-condensing)

Anti-Vibration
1 g @ IEC-68-2-6, sine wave (resonance search), 5-500 Hz, 1 Oct/min, 1 cycle, 13 min 17 sec per axis


Power Requirements

Input Voltage
12 to 48 VDC

Power Consumption
4.5 W
  • 170 mA @ 24 VDC
  • 340 mA @ 12 VDC


Standards and Certifications

Safety
UL 60950, CSA-C22.2 No. 60950-1, EN 60950-1

EMC
EN 55022 Class A, EN 61000-3-2 Class A, EN 61000-3-3, EN 55024, FCC Part 15 Subpart B Class A

Green Product
RoHS, CRoHS, WEEE


Reliability

Alert Tools
Built-in buzzer and RTC (real-time clock)

Automatic Reboot Trigger
Built-in WDT (watchdog timer)


Note
These hardware specifications describe the embedded computer unit itself, but not its official accessories. In particular, the wide temperature specification does not apply to accessories such as power adapters and cables.



Software Specifications


μClinux

Kernel Version
2.6.19

Protocol Stack
TCP, UDP, IPv4, SNMP V1, ICMP, ARP, HTTP, CHAP, PAP, DHCP, NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE

File System
JFFS2 (on-board flash)

System Utilities
msh, busybox, tinylogin, telnet, ftp

pppd
dial in/out over serial port daemon & PPPoE


snmpd
snmpd agent daemon

telnetd
Telnet Server daemon

inetd
TCP server manager program

ftpd
FTP server daemon

boa
Web server daemon




Ordering Information

Standard Operating Temperature Models (-10 to 60°C)

UC-7101-LX Mini RISC-based Ready-to-Run
Embedded Computer with 1 Serial Port, LAN, SD, µClinux OS

Wide Operating Temperature Models (-40 to 75°C)

UC-7101-T-LX Mini RISC-based Ready-to-Run
Embedded Computer with 1 Serial Port, LAN, SD, μClinux OS, Wide Temperature
All item includes
  1. 1 UC-7101-LX
  2. Quick Installation Guide
  3. Document & Software CD
  4. Console Port Cable: CBL-4PINDB9F-150 4-pin pin-header to female DB9 cable, 150 cm
  5. Universal Power Adaptor (includes terminal block to power jack converter)
  6. Product Warranty Statement

Optional Accessories

DK35A DIN-Rail mounting kit (35 mm)

Los clientes que han visto este artículo también vieron
Accept

This website uses cookies to provide the best possible experience. More information.