Logo

MOXA ioLogik E2260

SPHINX en Europe «  ch uk de fr at dk it nl be  «
Tel..: +34 933 396 542 |  Informaciones Legales |  Contáctanos |  FAQ |  Blog
      Lupe

Estás aquí « MOXA ioLogik E2260 »

MOXA ioLogik E2260

prodgraf


Active Ethernet I/O with 6 RTD Inputs, and 4 Digital Outputs



especificaciones


descripción

Link RTD Sensors and Digital Outputs to Ethernet Networks

The MOXA ioLogik E2260 is designed for system integrators to acquire and control remote RTD sensors over TCP/IP and Ethernet networks. Types of RTD sensors include PT, JPT, Ni types, and resistor. The ioLogik E2260 supports Ethernet and can run multiple protocols, such as Modbus/TCP, SNMP, HTTP, TCP, and UDP at 100 Mbps for high speed data acquisition. Data can be distributed to up to 10 host computers.

Independent Configurations for Multiple RTD Channels

Each fixed physical RTD input can be independently configured by software to PT, JPT, Ni, and resistor modes. In addition, a special virtual channel can be configured by software to Average or Deviation mode to calculate its fixed RTD channel.



ProdGrafik

más informaciónes


ioLogik E2260 Specifications


Inputs and Outputs

RTD Inputs
6 channels

Digital Outputs
4 channels

Isolation
3k VDC or 2k Vrms


RTD Inputs

Input Type
PT50, PT100, PT200, PT500, PT1000; JPT100, JPT200, JPT500, JPT1000; NI100, NI120, NI200, NI500, NI1000;
Resistance of 310, 620, 1250, and 2200 ohms

Input connection
2 or 3 wire

Sampling Rate
12 samples/sec (all channels)

Resolution
0.1°C or 0.1 ohm

Accuracy
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C

Input Impedance
625k ohms


Digital Output

Type
Sink

I/O Mode
DO or Pulse Output

Pulse Output Frequency
100 Hz

Over-voltage Protection
45 VDC

Over-current Protection
2.6 A (4 channels @ 650 mA)

Over-temperature Shutdown
175°C

Current Rating
200 mA per channel


Power Requirements

Power Consumption
95 mA @ 24 VDC


MTBF (mean time between failures)

Time
327,282 hrs

Database
Telcordia (Bellcore)



Common Specifications


LAN

Ethernet
1 10/100 Mbps RJ45 port

Protection
1.5 kV magnetic isolation

Protocols
Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP


Serial Communication

Interface
RS-485-2w: Data+, Data-, GND (3-contact terminal block)

Serial Line Protection
15 kV ESD for all signals


Serial Communication Parameters

Parity
None

Data Bits
8

Stop Bits
1

Flow Control
None

Baudrate
1200 to 115200 bps

Protocol
Modbus/RTU


Power Requirements

Power Input
24 VDC nominal, 12 to 36 VDC


Physical Characteristics

Wiring
I/O cable max. 14 AWG

Dimensions
115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)

Weight
under 250 g

Mounting
DIN rail or wall


Environmental Limits

Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature
-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity
5 to 95% (non-condensing)

Altitude
Up to 2000 m

Note Please contact us if you require products guaranteed to function properly at higher altitudes.


Standards and Certifications

Safety
UL 508

EMI
EN 61000-3-2; EN 61000-3-3; EN 61000-6-4;

FCC
Part 15, Subpart B, Class A

EMS
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5,
EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 61000-6-2

Shock
IEC 60068-2-27

Freefall
IEC 60068-2-32

Vibration
IEC 60068-2-6

Green Product
RoHS, CRoHS, WEEE



Ordering Information

Available Modules
ioLogik E2260 Ethernet Micro RTU Controller with 6 RTD inputs and 4 digital outputs
ioLogik E2260-T Ethernet Micro RTU Controller with 6 RTD inputs and 4 digital outputs,
-40 to 85°C operating temperature





PDF

descripción PDF MOXA ioLogik E2200 Series Datasheet (1244.6 kB)

plus   

Más productos de este grupo



Copyright © 2013 SPHINX Computer Vertriebs GmbH

CGVhasta ContáctanosDirectiva CookiesOficinasQuiénes somos