MOXA ioLogik E1263H-T

SPHINX en Europe
ES
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Productos grupos > I/O Modules > MOXA ioLogik E1263H-T

MOXA ioLogik E1263H-T

Product is End of Life : 2020-12-22
Ethernet Remote I/O with 2-port Ethernet Switches, 24 DI/Os, 10 AIs and 3 RTDs, -40 to 75°C Operating Temperature.

MOXA ioLogik E1263H-T
3686_31421.jpg
3686_6203.jpg
3686_6204.jpg
3686_12595.png
  • EspecificacionesEspecificaciones
  • DescripciónDescripción
  • Más informaciónesMás informaciónes
  • PDFPDF
  • IEC 60945 approval for harsh offshore environments
  • Wide operating temperature: -40 to 75°C (-40 to 167°F)
  • Active communication with patented MX-AOPC UA Server and Active OPC Server
  • 2-port Ethernet switch for daisy-chain topologies
  • User-defined Modbus/TCP addressing
  • Friendly configuration via web browser
Rugged Ethernet Remote I/O: The ioLogik E1200H Series for Harsh Environments

Industry-Proven Rugged Design

Installation of remote Ethernet I/O in offshore environments is a real challenge. It is critical to find devices properly designed for protected, safe use in these environments. Moxa’s ioLogik E1200H series with IEC 60945 certifications fulfills the need for devices suitable to such demanding industrial applications. Compactly packaged in a metal housing, this rugged hardware keeps operating in temperatures ranging from -40 to 75°C, meeting the stringent demands of IEC 60945 for harsh offshore applications.

Daisy-Chain Topology Reduces Deployment Costs

Thanks to its two embedded Ethernet switch ports, the ioLogik E1200H remote Ethernet I/O allows you to create daisy-chain topologies for easy cabling. In distributed Ethernet data acquisition applications, panels, units, and cabinets are often located at remote sites where space is limited. The daisy-chain capability of the ioLogik E1200H series allows ioLogik E1200H units to connect in series either to each other or to other nearby Ethernet devices, drastically saving on both space and wiring costs.
ProdGrafik

  • LAN
      Ethernet
      • 2 x 10/100 Mbps switch ports, RJ45
      Protection
      • 1.5 kV magnetic isolation
      Protocols
      • Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, HTTP

  • Power Requirements
      Power Input
      • 24 VDC nominal, 12 to 48 VDC

  • Physical Characteristics
      Wiring
      • I/O cable max. 14 AWG
      Mounting
      • DIN rail (standard), wall (with optional kit)

  • Environmental Limits
      Operating Temperature
      • -40 to 75°C (-40 to 176°F)
      Storage Temperature
      • -40 to 85°C (-40 to 185°F)
      Ambient Relative Humidity
      • 5 to 95% (non-condensing)

  • Standards and Certifications
      EMI
      • EN 61000-3-2; EN 61000-3-3; EN 61000-6-4; FCC Part 15, Subpart B, Class A
      EMS
      • EN 55024, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 61000-6-2
      Shock
      • IEC 60068-2-27
      Freefall
      • IEC 60068-2-32
      Vibration
      • IEC 60068-2-6
      Green Product
      • RoHS, CRoHS, WEEE

  • Serial Communication
      Interface
      • 1 x RS-232/422/485, software selectable (9-pin D-Sub male)
      Serial Line Protection
      • 4/8 kV ESD for all signals

  • Serial Communication Parameters
      Parity
      • None
      Data Bits
      • 8
      Stop Bits
      • 1
      Flow Control
      • None
      Baudrate
      • 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
      Protocol
      • Modbus/RTU

  • Inputs and Outputs
      Analog Inputs
      • 10 channels
      RTD Inputs
      • 3 channels
      Configurable DIOs
      • 24 channels
      Isolation
      • 3K VDC or 2K Vrms

  • Analog Input
      Type
      • Differential input
      Resolution
      • 16 bits
      I/O Mode
      • Voltage/Current
      Input Range
      • 0 to 10 V, 0 to 20 mA, 4 to 20 mA
      Accuracy
      • ±0.1% FSR @ 25°C
      • ±1.0% FSR @ -40 and 75°
      Sampling Rate (all channels)
      • 12 samples/sec
      Input Impedance
      • 10M ohms (minimum)
      Built-in Resistor for Current Input
      • 120 ohms

  • Digital Input
      Sensor Type
      • Wet Contact (NPN or PNP), Dry Contact
      I/O Mode
      • DI or Event Counter (channel 0–7)
      Dry Contact
      • On: short to GND
      • Off: open
      Wet Contact (DI to GND)
      • On: 0 to 3 VDC
      • Off: 10 to 30 VDC
      Common Type
      • • 12 points per COM
      Counter Frequency
      • 250 Hz
      Digital Filtering Time Interval
      • Software selectable

  • RTD Inputs
      Input Type
      • PT100 (3-wire): -50 to 150°C, 0 to 100°C, 0 to 200°C, 0 to 400°C, -50 to 200°C
      • PT1000 (3-wire): -50 to 200°C
      Sampling Rate
      • 12 samples/sec (all channels)
      Resolution
      • 0.5°C
      Accuracy
      • ±0.1% FSR @ 25°C
      • ±1.0% FSR @ -40 and 75°C
      Input Impedance
      • 625K ohms

  • Digital Output
      Type
      • Sink
      I/O Mode
      • DO or Pulse Output (channel 0–7)
      Pulse Output Frequency
      • 500 Hz
      Over-voltage Protection
      • 45 VDC
      Over-current Protection
      • 2.6 A (4 channels @ 650 mA)
      Over-temperature Shutdown
      • 175°C (typical), 150°C (min.)
      Output Current Rating
      • 200 mA per channel

  • Power Requirements
      Power Input
      • 24 VDC nominal, 12 to 48 VDC
      Power Consumption
      • 315 mA @ 24 VDC

  • Physical Characteristics
      Dimensions
      • 204 x 113 x 36.3 mm ( 8.03 x 4.45 x 1.43 in)
      Weight
      • 945 g
Los clientes que han visto este artículo también vieron
Accept

This website uses cookies to provide the best possible experience. More information.