MOXA DA Series Expansion Modules

Moxa’s peripheral expansion modules, which come with serial ports, LAN ports, switch ports, fiber ports, Time Synchronization IRIG-B ports, and PCI slots, give end-users the greatest flexibility for setting up industrial applications and are fully compatible with Moxa’s mbedded computers that have perpheral expansion slots.

The serial port modules include an 8-port RS-232/422/485 module with either DB9 or terminal block connectors, and an 8-port RS-422/485 module with terminal block connectors. Some modules are even designed with 2 kV digital isolation, making them fully suitable or the great demands of industrial applications that use serial communication.

In addition, a 4-port LAN module, 8-port switch module, and 4-port fiber LAN module are available for setting up industrial communication applications with Ethernet-based devices. A universal PCI development kit is also available for PCI-based devices for expanding industrial pplications at a reasonable cost.

The time synchronization module features 3 digital inputs and 4 digital outputs and provides precision timing information using IRIG-B input signals. The module is designed for embedded computers that support the PCI/104 interface.

ll modules are designed to offer the greatest flexibility for setting up applications and performing industrial tasks. In particular, users can swap out modules quickly and easily.

DA-IRIGB-4DIO-PCI104-EMC4 Hardware Specifications

Hardware


Communication Controller
FPGA Cyclone V

Form Factor
PC-104


Time Code Input


IRIG-B
Based on the IRIG STANDARD 200-04 and IEEE 1344


Precision and Accuracy


Accuracy (Time Synchronization)
±1 µs

Accuracy (Free Running)
±500 ms @ 24 hr


Input Signals


Single Level
• Open: High
• Short to GND:> Low
• Level Input: 5 to 12 V

Differential Level
• D+ - D- > 0.2 V, RXD is High
• D+ - D- < -0.2 V, RXD is Low
• Level Input: 5 V


Interface


IRIG-B
2-pin wafer to DB9

DI/DO
10-pin wafter to DB9


Protection


ESD Protection
8 kV contact, 15 kV Air ESD protection

Surge Protection
2 kV line-to-line and 4 kV line-to-ground surge protection, 8/20 µs waveform

Insulation
500 V


Digital Input


Input Channels
3, source type

Input Voltage
0 to 30 VDC

Digital Input Levels for Dry Contacts
• Logic level 0: Close to GND
• Logic level 1: Open

Digital Input Levels for Wet Contacts
• Logic level 0: +3 V max.
• Logic level 1: +10 V to +30 V (source to DI)

Isolation
3 kV optical isolation

Connector Type
DB9 male


Digital Output


Output Channels
4, sink type

Output Current
Max. 200 mA per channel

On-state Voltage
24 VDC nominal, open collector to 30 V

Isolation
3 kV optical isolation

Connector Type
Male


Operating Systems


Windows
Windows 7E

Linux
Debian 7


Physical Characteristics


Dimensions
90 x 96 mm (3.54 x 3.78 in)


Environmental Limits


Operating Temperature
-10 to 60°C (14 to 140°F)

Storage Temperature
-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity
5 to 95% (non-condensing)

Altitude
Up to 2000 m


Standards and Certifications


EMC
CE, FCC

EMI
EN 55022, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Subpart B Class A

EMS
EN 55024, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11

Green Product
RoHS, CRoHS, WEEE

DA-SP08-DB, DA-SP08-I-DB, DA-SP08-I-TB Hardware Specifications

Serial Interface


Serial Standards
8 RS-232/422/485 ports, software selectable (DB9 male or terminal block connector)

ESD Protection
15 kV for all signals

Isolation
2 kV digital isolation (DA-SP08-I-DB and DA-SP08-I-TB only)


Serial Communication Parameters


Data Bits
5, 6, 7, 8

Stop Bits
1, 1.5, 2

Parity
None, Even, Odd, Space, Mark

Flow Control
RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485

Baudrate
50 bps to 921.6 kbps (supports non-standard baudrates; see user’s manual for details)


Serial Signals


RS-232
TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND

RS-422
TxD+, TxD-, RxD+, RxD-, GND

RS-485-4w
TxD+, TxD-, RxD+, RxD-, GND

RS-485-2w
Data+, Data-, GND


Physical Characteristics


Weight
290 g

Dimensions
130 x 150 x 42 mm (5.12 x 5.91 x 1.65 in)

MTBF (mean time between failures)
1,753,143 hrs

DA-SP38-I-TB Hardware Specifications

Serial Interface


Serial Standards
8 RS-422/485 ports, software selectable (DB9 male or terminal block connector)

ESD Protection
15 kV for all signals

Isolation
2 kV digital isolation


Serial Communication Parameters


Data Bits
5, 6, 7, 8

Stop Bits
1, 1.5, 2

Parity
None, Even, Odd, Space, Mark

Flow Control
RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485

Baudrate
50 bps to 921.6 kbps (supports non-standard baudrates; see user’s manual for details)


Serial Signals


RS-422
TxD+, TxD-, RxD+, RxD-, GND

RS-485-4w
TxD+, TxD-, RxD+, RxD-, GND

RS-485-2w
Data+, Data-, GND


Physical Characteristics


Weight
245 g

Dimensions
130 x 150 x 42 mm (5.12 x 5.91 x 1.65 in)

DA-LN04-RJ Hardware Specifications

Ethernet Interface


LAN
4 auto-sensing 10/100 Mbps ports (RJ45)

Magnetic Isolation Protection
1.5 kV built-in


Physical Characteristics


Weight
198 g

Dimensions
132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in)

DA-SW08-RJ Hardware Specifications

Ethernet Interface


LAN
8 auto-sensing 10/100 Mbps unmanaged Ethernet switch ports (RJ45)

Magnetic Isolation Protection
1.5 kV built-in


Physical Characteristics


Weight
200 g

Dimensions
132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in)

DA-UPCI-DK Hardware Specifications

Universal PCI Expansion Adatpor


PCI Slots
1

Interface Bus
32-bit Universal PCI (3.3 V and 5 V)


Physical Characteristics


Weight
195 g

Dimensions
132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in)

MTBF (mean time between failures)
11,053,266 hrs

DA-FX04-MM-ST-T Hardware Specifications

Fiber Interface


Number of Ports
4 (100BaseFX)

Fiber Mode
Multi-mode

Connector Type
ST

Optical Wavelength
0 to 2 km, 1310 nm (62.5/125 μm, 500 MHz*km)

Min-TX Output
-20 dBm

Max-TX Output
-14 dBm

RX Sensitivity
-34 dBm


Physical Characteristics


Weight
495 g Dimensions
132 x 150 x 42 mm (5.20 x 5.91 x 1.65 in)


Environmental Limits


Operating Temperature
-40 to 70°C (-40 to 158°F)


Standards and Certifications


EMC
EMC Level 4, ESD Level 4, criteria A


Software Functions


IEEE 1588 or IP Teaming Selectable (Default =IP Teaming)
Supports 4 modes

AFT
Adaptor Failover Teaming

SFT
Switch Fault Tolerance

ALB
Adaptor Failover and Load Balancing

Link Aggregation
supported

Ordering Information
Available Models
DA-IRIGB-4DIO-PCI104-EMC4	Time synchronization expansion module, 1 IRIG-B signal input port, 3 digital inputs, 4 digital outputs
DA-SP08-I-DB	8-port RS-232/422/485 serial module with DB9 connector and digital isolation
DA-SP08-DB	8-port RS-232/422/485 serial module with DB9 connector
DA-SP08-I-TB	8-port RS-232/422/485 serial module with terminal block connector and digital isolation
DA-SP38-I-TB	8-port RS-422/485 serial module with terminal block connector and digital isolation
DA-SW08-RJ	8-port 10/100 Mbps unmanaged switch module
DA-LN04-RJ	4-port 10/100 Mbps LAN module
DA-UPCI-DK	Universal PCI development kit
DA-FX04-MM-ST-T	4-port (100BaseFX) fiber LAN module with multi-mode, ST connector, supports IP Teaming
DA-SP08-I-EMC4-DB	8-port RS-232/422/485 serial module with DB9 connector, digital isolation, and capable of withstanding EMS Level 4 environments
DA-SP08-I-EMC4-TB	8-port RS-232/422/485 serial module with terminal block connector, digital isolation, and capable of withstanding EMS Level 4 environments